|
請問一下
我們利用DE2_NIOS_DEVICE_LED這個範例程式
按照著Creating Multiprocessor Nios II Systems這份手冊的步驟
建立多核心系統
當在執行NIOS的時候
正常的情況會出現
"nios2-terminal: connected to hardware target using JTAG UART on cable
nios2-terminal: "USB-Blaster [USB-0]", device 1, instance 0
nios2-terminal: (Use the IDE stop button or Ctrl-C to terminate)
FIRST LOCK - Message from CPU 1. Number sent: 1
Message from CPU 1. Number sent: 2
Message from CPU 1. Number sent: 3
Message from CPU 1. Number sent: 4
Message from CPU 2. Number sent: 1..."
而我執行結果只有出現這樣
"nios2-terminal: connected to hardware target using JTAG UART on cable
nios2-terminal: "USB-Blaster [USB-0]", device 1, instance 0
nios2-terminal: (Use the IDE stop button or Ctrl-C to terminate)"
是不是我少了什麼步驟嗎? |
|