关于友晶TRDB_ADA子板卡的范例使用问题

bear

小弟入门不久，刚刚拿到了友晶的TRDB_ADA的子板卡，准备插在DE2_70母板上使用。为了熟悉一下TRDB_ADA的使用，我把TRDB_ADA附带光盘中的“DE2_70_ADA”的这个设计范例拷贝到我的计算机上，准备编译一下下载到板子里面跑跑看，但是一编译这个工程，QUARTUS II 9.0就报错：很多实例找不到，实在不知道怎么解决，我把报错的情况截图放在下面了，那位大侠可以帮我解释一下为什么啊？先行谢过了

bear

上面的图看不清楚，我把出错信息贴在这里：
Info: Elaborated megafunction instantiation "pll:pll_100|altpll:altpll_component"
Info: Instantiated megafunction "pll:pll_100|altpll:altpll_component" with the following parameter:
        Info: Parameter "clk0_divide_by" = "2"
        Info: Parameter "clk0_duty_cycle" = "50"
        Info: Parameter "clk0_multiply_by" = "5"
        Info: Parameter "clk0_phase_shift" = "0"
        Info: Parameter "clk1_divide_by" = "4"
        Info: Parameter "clk1_duty_cycle" = "50"
        Info: Parameter "clk1_multiply_by" = "5"
        Info: Parameter "clk1_phase_shift" = "0"
        Info: Parameter "compensate_clock" = "CLK0"
        Info: Parameter "gate_lock_signal" = "NO"
        Info: Parameter "inclk0_input_frequency" = "20000"
        Info: Parameter "intended_device_family" = "Cyclone II"
        Info: Parameter "invalid_lock_multiplier" = "5"
        Info: Parameter "lpm_hint" = "CBX_MODULE_PREFIX=pll"
        Info: Parameter "lpm_type" = "altpll"
        Info: Parameter "operation_mode" = "NORMAL"
        Info: Parameter "port_activeclock" = "PORT_UNUSED"
        Info: Parameter "port_areset" = "PORT_USED"
        Info: Parameter "port_clkbad0" = "PORT_UNUSED"
        Info: Parameter "port_clkbad1" = "PORT_UNUSED"
        Info: Parameter "port_clkloss" = "PORT_UNUSED"
        Info: Parameter "port_clkswitch" = "PORT_UNUSED"
        Info: Parameter "port_configupdate" = "PORT_UNUSED"
        Info: Parameter "port_fbin" = "PORT_UNUSED"
        Info: Parameter "port_inclk0" = "PORT_USED"
        Info: Parameter "port_inclk1" = "PORT_UNUSED"
        Info: Parameter "port_locked" = "PORT_USED"
        Info: Parameter "port_pfdena" = "PORT_UNUSED"
        Info: Parameter "port_phasecounterselect" = "PORT_UNUSED"
        Info: Parameter "port_phasedone" = "PORT_UNUSED"
        Info: Parameter "port_phasestep" = "PORT_UNUSED"
        Info: Parameter "port_phaseupdown" = "PORT_UNUSED"
        Info: Parameter "port_pllena" = "PORT_USED"
        Info: Parameter "port_scanaclr" = "PORT_UNUSED"
        Info: Parameter "port_scanclk" = "PORT_UNUSED"
        Info: Parameter "port_scanclkena" = "PORT_UNUSED"
        Info: Parameter "port_scandata" = "PORT_UNUSED"
        Info: Parameter "port_scandataout" = "PORT_UNUSED"
        Info: Parameter "port_scandone" = "PORT_UNUSED"
        Info: Parameter "port_scanread" = "PORT_UNUSED"
        Info: Parameter "port_scanwrite" = "PORT_UNUSED"
        Info: Parameter "port_clk0" = "PORT_USED"
        Info: Parameter "port_clk1" = "PORT_USED"
        Info: Parameter "port_clk2" = "PORT_UNUSED"
        Info: Parameter "port_clk3" = "PORT_UNUSED"
        Info: Parameter "port_clk4" = "PORT_UNUSED"
        Info: Parameter "port_clk5" = "PORT_UNUSED"
        Info: Parameter "port_clkena0" = "PORT_UNUSED"
        Info: Parameter "port_clkena1" = "PORT_UNUSED"
        Info: Parameter "port_clkena2" = "PORT_UNUSED"
        Info: Parameter "port_clkena3" = "PORT_UNUSED"
        Info: Parameter "port_clkena4" = "PORT_UNUSED"
        Info: Parameter "port_clkena5" = "PORT_UNUSED"
        Info: Parameter "port_extclk0" = "PORT_UNUSED"
        Info: Parameter "port_extclk1" = "PORT_UNUSED"
        Info: Parameter "port_extclk2" = "PORT_UNUSED"
        Info: Parameter "port_extclk3" = "PORT_UNUSED"
        Info: Parameter "valid_lock_multiplier" = "1"
Info: Elaborating entity "lpm_add" for hierarchy "lpm_add:lpm"
Info: Elaborating entity "lpm_add_sub" for hierarchy "lpm_add:lpm|lpm_add_sub:lpm_add_sub_component"
Info: Elaborated megafunction instantiation "lpm_add:lpm|lpm_add_sub:lpm_add_sub_component"
Info: Instantiated megafunction "lpm_add:lpm|lpm_add_sub:lpm_add_sub_component" with the following parameter:
        Info: Parameter "lpm_direction" = "ADD"
        Info: Parameter "lpm_hint" = "ONE_INPUT_IS_CONSTANT=NO,CIN_USED=NO"
        Info: Parameter "lpm_pipeline" = "1"
        Info: Parameter "lpm_type" = "LPM_ADD_SUB"
        Info: Parameter "lpm_width" = "14"
Info: Found 1 design units, including 1 entities, in source file db/add_sub_omg.tdf
        Info: Found entity 1: add_sub_omg
Info: Elaborating entity "add_sub_omg" for hierarchy "lpm_add:lpm|lpm_add_sub:lpm_add_sub_component|add_sub_omg:auto_generated"
Error: Node instance "ux000" instantiates undefined entity "asj_altqmcpipe"
Error: Node instance "ux001" instantiates undefined entity "asj_dxx_g"
Error: Node instance "ux002" instantiates undefined entity "asj_dxx"
Error: Node instance "ux0219" instantiates undefined entity "asj_nco_apr_dxx"
Error: Node instance "ux008" instantiates undefined entity "asj_gam_dp"
Error: Node instance "ux0220" instantiates undefined entity "asj_nco_as_m_dp_cen"
Error: Node instance "ux0122" instantiates undefined entity "asj_nco_as_m_cen"
Error: Node instance "ux0123" instantiates undefined entity "asj_nco_as_m_cen"
Error: Node instance "m1" instantiates undefined entity "asj_nco_madx_cen"
Error: Node instance "m0" instantiates undefined entity "asj_nco_mady_cen"
Error: Node instance "ux0136" instantiates undefined entity "asj_nco_derot"
Error: Node instance "blk0" instantiates undefined entity "asj_nco_mob_w"
Error: Node instance "blk1" instantiates undefined entity "asj_nco_mob_w"
Error: Node instance "ux710isdr" instantiates undefined entity "asj_nco_isdr"
Error: Node instance "ux000" instantiates undefined entity "asj_altqmcpipe"
Error: Node instance "ux001" instantiates undefined entity "asj_dxx_g"
Error: Node instance "ux002" instantiates undefined entity "asj_dxx"
Error: Node instance "ux0219" instantiates undefined entity "asj_nco_apr_dxx"
Error: Node instance "ux008" instantiates undefined entity "asj_gam_dp"
Error: Node instance "ux0220" instantiates undefined entity "asj_nco_as_m_dp_cen"
Error: Node instance "ux0122" instantiates undefined entity "asj_nco_as_m_cen"
Error: Node instance "ux0123" instantiates undefined entity "asj_nco_as_m_cen"
Error: Node instance "m1" instantiates undefined entity "asj_nco_madx_cen"
Error: Node instance "m0" instantiates undefined entity "asj_nco_mady_cen"
Error: Node instance "ux0136" instantiates undefined entity "asj_nco_derot"
Error: Node instance "blk0" instantiates undefined entity "asj_nco_mob_w"
Error: Node instance "blk1" instantiates undefined entity "asj_nco_mob_w"
Error: Node instance "ux710isdr" instantiates undefined entity "asj_nco_isdr"
Error: Quartus II Analysis & Synthesis was unsuccessful. 28 errors, 267 warnings
        Error: Peak virtual memory: 175 megabytes
        Error: Processing ended: Thu Dec 17 15:46:05 2009
        Error: Elapsed time: 00:00:06
        Error: Total CPU time (on all processors): 00:00:03
Error: Quartus II Full Compilation was unsuccessful. 30 errors, 267 warnings
请各位大侠多多指教！

bear

huguangheng ，谢谢您的回复，LPM_ADD这个IP模块我重新的添加过，去除它也试过，问题还是老样子，问题可能还是出在NCO上，在QUARTUS II9.0 的环境底下可以重新的编译PLL和LPM的IP核，但是就是找不到NCO的IP核，可能是9.0的环境不支持实例中NCO的IP核？还有，要是你看到我的留言，可否告知你是用QUARTUS的什么版本跑那个范例的？

bear

5# dwcc
谢谢dwcc,我有研究了一下，问题可能和你说的差不多，你和“huguangheng”说的对，这个例子的重点是熟悉工程中的引脚应用，有问题再向你请教。