MyFPGA Forum

 找回密码
 注册
搜索
查看: 1808|回复: 0

【FAQ】什么情况下要更新u-boot-spl-dtb.hex文件, 如何更新呢?

[复制链接]
发表于 2021-8-31 17:32:36 | 显示全部楼层 |阅读模式
本帖最后由 bingxia 于 2021-8-31 17:40 编辑

Q: 使用DE10-Pro SX开发板,用的是DE10-Pro_SX_v2.3.0/Demonstrations/SoC_FPGA/GHRD/16G/software/u-boot/spl里的u-boot-spl-dtb.hex文件,当我有了新的.sof文件后,需要更新.hex文件吗,如何更新呢?

A:  如果工程里Stratix 10 Hard Processor System IP的HPS设置与GHRD一样,没有修改,可以不用编译更新u-boot-spl-dtb.hex,就用CD里的u-boot-spl-dtb.hex文件。

HPS_Setting.jpg

关于如何更新u-boot-spl-dtb.hex文件,可以参考Intel® Stratix® 10 SoC FPGA Boot User Guide
您需要登录后才可以回帖 登录 | 注册

本版积分规则

小黑屋|手机版|Archiver|MyFPGA

GMT+8, 2024-3-29 23:23 , Processed in 0.050603 second(s), 19 queries .

Powered by Discuz! X3

© 2001-2013 Comsenz Inc.

快速回复 返回顶部 返回列表