标题: 【FAQ】固化EPCS时提示CONF_DONE pin failed to go high in device 2 [打印本页] 作者: Doreen 时间: 2021-8-17 09:45 标题: 【FAQ】固化EPCS时提示CONF_DONE pin failed to go high in device 2 本帖最后由 Doreen 于 2021-8-19 18:46 编辑
Q: DE0-Nano-SOC 固化EPCS时提示
209040 Can't accessJTAG chain
209014 CONF_DONE pin failed to go high in device 2. make sure all communication cables are securely connected. select a different device. check the power on the target system or make sure all nCE pins are connected to GND
