|
各位好~我是使用altera IDE的新手~煩請各位幫忙看看我是不是有地方做錯
在建構的過程中
no reset vector has been specified for this CPU
no exception vector has been specified for this CPU
這兩個問題,沒辦法完全消除
試過
on chip memory
sdram
用上面兩個去試過所有可能的組合(mem/mem,sd/sd,sd/mem,mem/sd)
no reset vector has been specified for this CPU
no exception vector has been specified for this CPU
總是會有一個沒辦法去除
THX~各位 |
|